OPENINGS 3.1

FIFTEEN TYPES OF INNOVATIVE HANDLES FOR KITCHEN

The 3.1 system is characterized by six types of door openings, which allow us to interpret in a different way the functionality and aesthetic of the Copatlife kitchen.
 
Copatlife realizes fifteen types of external handles, push-pull, “Set” and “Board” as innovative integrated handles, in order to cover all different tastes.
 
In addition, there are: curved recess grip for the door with a straight edge, flat recess grip for the door with a straight edge and built-in handle and door with upper edge tilted to 30° and “Grip” integrated handle, which protects the frontal panel in a very critical point and offer a good grip for this kind of opening.

“TOA” HANDLE

“Toa” is a new external handle, here presented in the 3.1 system. It has a 12 mm cylindrical diameter and it is the reinterpretation, in a modern way, of the metal rod. 

“NICE” HANDLE

Copatlife presents a new external handle that you can choose as an opening for your modern kitchen. This is the “Nice” handle with an essential shape and a frontal inclination. The opening offers a good grip on the internal side.

“ZETAFRAME” HANDLE

The “Zetaframe” handle, made of aluminum, is available in the following finishes: satin, champagne, and burnished, to match with plinths and grooves.

“BOARD” INTEGRATED HANDLE

It is a new integrated handle and it offers a good grip. Through its geometrical shape, it substitutes visually the effect of a recessed grip on the structure.

30 DEGREE DOOR AND “GRIP” HANDLE

The door has a tilt of 30 degrees on the upper edge, on which the “Grip handle” is mounted on the internal side in order to protect the door and to increase the grip. The “Grip” handle is characterized by a profile, that presents knurling for 50% of its surface and it helps the opening of the door.

30° CUT DOOR WITH “GRIP” HANDLE IN CHAMPAGNE FINISH

“Grip” handle is characterized by a thin profile that presents on almost half of its surface milling that permits an easier opening.

30 DEGREE DOOR IN TECNOMALTA FINISH

The door with the upper 30° edge is available in the “Tecnomalta” finish and it is here presented in this composition in “Brera” color.

INTEGRATED HANDLE INSIDE THE FRAME OF THE DOOR 

25 mm thick door realized with a frame in solid oak and internal wood particleboard panel with a low formaldehyde emission, coated by a veneer of veined oak horizontal grain.

“PENDULA” HANDLE

This built-in handle, proposed by Copatlife, is used only for tall units with coplanar sliding doors and it is available in four different finishes: satin, brill, bianco, and brunito aluminum.

PUSH-PULL OPENING

This kind of opening grants a clean and edgeless aesthetical result.

EXTERNAL HANDLE WITH AN EXCELLENT GRIP

The “TOA” external handle of 12 mm in diameter is the metal modern version of the tondino handle.