OPENINGS 2.1

FUNCTIONAL AND DESIGN HANDLES OF KITCHENS FOR ALL NEEDS

The 2.1 system is characterized by seven types of openings, which allow us to interpret in a different way the functionality and aesthetic of the kitchen.
Copatlife realizes ten types of external handles, push-pull, “Set” and “Board” as innovative integrated handles in order to cover different tastes, curved recess grip for the door with a straight edge.

Flat recess grip for the door with a straight edge and built-in handle and door with upper edge tilted to 30° and “GRIP” handle, which offer a complete planning range able to adapt to all needs.

STRAIGHT EDGE DOOR WITH “BUILT-IN” HANDLE

The door has a straight edge on all four sides and there is a “Built-in” handle in the upper side. This “Built-in” handle is available in the following finishes: satin aluminum, brill aluminum, bianco matt, and nero matt.

“ZETAFRAME” HANDLE 

The “Zetaframe” handle, made of aluminum, is available in the following finishes: satin, champagne, and burnished, to match with plinths and grooves.

ONE-DOOR TALL UNITS WITH GROOVE

The tall larder units with one door and groove opening can be equipped with shelves or with pull-out mechanisms which take full advantage of the internal space. For the utmost, functionality, an internal LED light, which switched on automatically when the door is opened, is also available.

CORNER LARDER CABINET

The corner larder cabinet can be equipped with various kinds of accessories. The absence of the bottom panel and the 155° hinges allow direct access to the cabinet for easy storage and use of small appliances.

30 DEGREES EDGED DOOR AND “GRIP” HANDLE

The door has a 30° slanting upper edge, which is completed with a “Grip” handle on the inside to protect the door and make it easier to grasp. The “Grip” handle features a profile that is ribbed on half of its surface to easy opening, as well as a slight protrusion on the external edge of the door. This protrusion aids opening and creates an attractive technical detail that frames the top of the door.

ISLAND BASE UNITS WITH A HOB AND SINK 

79 cm high base units with push-to-open fronts, 8 cm high plinth, and 12 mm thick top. The doors, side panels, and top are coated with Grigio Fenix Ntm while the plinth has a satin Grigio 50 lacquered finish.

BASE UNIT WITH 150 CM WIDE LARGE DRAWERS

The base unit with two 150 cm wide drawers is composed of two 75 cm wide modules and a single front. The full extension and the soft closing drawer structures guarantee smooth scrolling and a high load capacity.

PUSH-PULL OPENING

Base unit with a push-pull opening for hinged or pull-out doors. This type of opening allows a linear and clean aesthetic without projections.

“ZETAFRAME” HANDLE

The “Zetaframe” handle, made of aluminium, is available in the following finishes: satin, champagne and burnished, to match with plinths and grooves. The size of the “Zetaframe” handles are in proportion with that of the doors in which the handle is built-in. They can be fitted vertically and horizontally. Their minimal projection from the door surface allows them to be used on coplanar tall units and tall units with retracting doors.

BASE UNIT FOR SINK WITH TWO LARGE DRAWERS WITH PUSH-PULL OPENING

The pull-out independent fronts opening offers the best accessibility to the inside where both a dustbin rack and household cleaning products can be placed. The horizontal fix shelf is an optimal ledge for small objects to be arranged and it doesn’t interfere with the siphon at all.

STRAIGHT EDGE DOOR 

Melamine doors feature a “straight edge” on the four sides. Matched with a curved recess groove it offers a perfect grip even on base cabinets with dishwashers or tall units for fridges. This door is available in twenty-seven finishes: nineteen in “Thermo structured melamine”, four in “super matt melamine” and four in “glossy tecnogloss”.

“SPINNER” HANDLE

This new external handle has a light and basic shape, whether in the horizontal position or in the vertical. The handle has an optimal grip and comfort also when it is used for easing the opening of full-height doors.“Spinner” handle is available in two finishes: a soft version in bianco matt and one more technical in satin aluminum.

“SET” HANDLE

This is an innovative handle placed on the horizontal or vertical edge of the door. The handle is characterized by an original design with a sinuous shape. Through a particular working on the internal side, it has, to the touch, great comfort in the opening. “Set” handle is available in three different finishes: satin, brill, and burnished aluminum.